QUiCKNews e Rassegna Stampa Hotel about QUiCKFairs® | FAQ   QUiCKNetwork
 
  Visita
  Coiltech International Coil Winding Expo and Conference

  Perché mettere già Coiltech 2018 in agenda

  World Magnetic Conference

  Guida per i Relatori WMC

  Voli diretti per Coiltech

  Cosa pensano i visitatori di Coiltech

   Iscriviti e Visita
  Esponi
 

Perché esporre

 

Profilo visitatori Coiltech

 

Lista espositori 2018

 

Impressioni edizione 2017

 

Testimonianze espositori

 

Foto espositori Coiltech 2017

 

Certificazione Statistiche

 

Visibilità e sponsoring

 Contattaci
   Acquista il tuo stand
   Sponsorizza in fiera
 
 
Share |


International Coil Winding Exhibition Coiltech

Fiera Coiltech 2018 > > Esponi > Lista espositori 2018

QUiCKFairs®
Coiltech 2018

Pordenone 26/27 September 2018  

Lista espositori 2018

 

Coiltech Coil Winding exhibition and conference sign ups at the end of December

 

Alla fine di Dicembre 2017, ci sono 21,2% più prenotazioni di stand per l'edizione 2018 rispetto a fine Dicembre 2016 per l'edizione 2017. Il numero di aziende che ha prenotato per la prima volta è quasi il doppio.


Già adesso, 80% degli espositori dell'edizione precedente hanno acquistato il loro stand per Coiltech 2018. In base all'esperienza delle precedenti edizioni è ragionevole aspettarsi che la quota di rebooking anche nel 2018 supererà il 90%.

 

Altre fiere del settore raggiungono una quota di rebooking intorno ai 75%.

 

Questi valori sono un significativo indice di customer satisfaction da parte degli espositori. Coiltech è la fiera leader del Coil Winding per questo indice.

 

49 espositori rebooking (23%) hanno prenotato stand più grandi per l'edizione 2018 per far fronte alla forte crescita dei visitatori (per dettagli, consultare il profilo visitatori) e per poter ospitare più clienti in contemporanea.

 

 

 
 
Azienda Nazione N. Stand
3M Austria

3M AUSTRIA

High-temperature electrical insulating paper & board products; adhesive tapes; electrical resins;

  AUSTRIA 6-A37
    Represented by: IDI FABRICATION EMT GMBH
 
ABB

ABB

Leader nella fornitura di sistemi di misura e sicurezza, commutatori, isolatori e materiale isolante

  ITALIA 8-C30/8-C32
 
ACEBSA

ACEBSA

Enamelled/insulated copper & aluminium wire. Round & flat section. Roebel bar (transposed). Sleeving

  SPAGNA 6-D06/6-D08/6-D10/6-D12
    Represented by: L.PI.EMME SRL
 
AD.RES S.R.L.

AD.RES S.R.L.

Electrical, Electronic and EMI Shielding Tapes.

  ITALIA 7-B13
 
AEV GROUP

AEV GROUP

Manufacturers of resins varnishes, compounds for the electrical industry along with VI/VPI equipment

  ITALIA 6-B14/6-B16
 
Akzo Nobel Powder Coatings GmbH

AKZO NOBEL POWDER COATINGS GMBH

We develop and produce RESICOAT powder coatings for insulation and corrosion protection.

  GERMANIA 7-C23
 
Albesiano

ALBESIANO

Varnishes, resins, compounds and insulating products

  ITALIA 8-A10/8-B09
    Represented by: VON ROLL INSULATION
 
Alcast S.p.A.

ALCAST S.P.A.

Diecast rotors

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
    Represented by: EURO GROUP S.P.A.
 
Algala srl

ALGALA SRL

Building tools,rotor&stator lamination.Blanking/Stampi xrotori-statori e lineari.Trancia.Imbutiture

  ITALIA 7-A20
 
Alliance Winding Group

ALLIANCE WINDING GROUP

Machines and automation for EL motors: Winding Process, Resin treatment, tube fuse, R&D Services

  ITALIA 5-E06
 

ALOYS MEIER GMBH & CO. KG

  GERMANIA 8-B12
 
ALTAIR

ALTAIR

Technology and services for business and engineering innovation

  U.S.A. 6-C12/6-D13
    Represented by: SPIN APPLICAZIONI MAGNETICHE SRL
 
ALTANOVA

ALTANOVA

Offline portable equipment and online monitoring solutions for HV/MV electrical assets

  ITALIA 7-B15
 
AMES

AMES

Structural sintered parts, soft magnetic parts, gears, self-lubricating bearings, silencers, filters

  SPAGNA 7-B32
 
AMR ELECTRONIQUE

AMR ELECTRONIQUE

Polymerization Machines by Joule Effect for Bonding wires and Hot-Crimping machines for Litz cables

  FRANCIA 6-D20
 
Ansteel Italia

ANSTEEL ITALIA

steel trading steel products silicon steel cutting service

  ITALIA 5-E22/5-E24
 
ArcelorMittal CLN

ARCELORMITTAL CLN

Il punto di riferimento nella distribuzione di prodotti piani in acciaio da Centro di Servizio.

  ITALIA 6-C41/6-D41
 
Ardemagni S.p.a.

ARDEMAGNI S.P.A.

Electrical Steel

  ITALIA 5-C12/5-D11
 
Arno Fuchs Kabeltechnik

ARNO FUCHS KABELTECHNIK

Stripping machines for varnished wires, cutting machines, crimping machines.

  GERMANIA 6-C17
 
Aros Nuclei snc

AROS NUCLEI SNC

Manufacturer - distributor of soft magnetic parts (by Chang Sung C. and Cosmo)and components.

  ITALIA 7-C26
 
ASITA

ASITA

Dal 1985 strumentazione elettrica ed elettronica di misura, per l’efficienza energetica e la R&S

  ITALIA 6-C32
 
AT MOTORS srl avvolgimenti motori elettrici

AT MOTORS SRL AVVOLGIMENTI MOTORI ELETTRICI

Production of windings for electric motors.

  ITALIA 6-D21
 
Aumann GmbH

AUMANN GMBH

Innovative winding, wire enamelling technology and automation

  GERMANIA 5-E38
 
Avvolgimenti Zampolli S.r.l.

AVVOLGIMENTI ZAMPOLLI S.R.L.

Windings for electric motors, construction and repair

  ITALIA 6-A21
 
Axalta Coating Systems

AXALTA COATING SYSTEMS

Global supplier of high performance brand products for electrical insulation systems

  GERMANIA 5-B04
 
Axson Italia srl - SikaAxson

AXSON ITALIA SRL - SIKAAXSON

Fornitore e sviluppatore di resine ad elevate prestazioni

  ITALIA 7-C14
 
BALANCE SYSTEMS SRL

BALANCE SYSTEMS SRL

Balancing machines for rotating components and Process control systems for machine tools

  ITALIA 6-C23
 
BARCELONA PERFORMANCE YARNS

BARCELONA PERFORMANCE YARNS

Technical yarns for motor manufacturing industry

  SPAGNA 5-A20/5-A22
    Represented by: BENNETT
 
BENNETT

BENNETT

Winding and inserting tools for stators.

  SPAGNA 5-A20/5-A22
 
BLF srl

BLF SRL

HIGH TEMPERATURE CABLES

  ITALIA 5-A01
 
Blink

BLINK

Electrical components and wiring for electrical appliances

  ITALIA 6-C16
    Represented by: LIMITOR GMBH
 
BLUERGO SRL

BLUERGO SRL

Bluergo is a company specilized in design and manufacture of electromagnetic components

  ITALIA 5-E13
 
BROCKHAUS MEASUREMENTS

BROCKHAUS MEASUREMENTS

Instrumentation devices and systems for the quality control and examination of magnetic materials

  GERMANIA 6-B33
 
Broomfield

BROOMFIELD

Broomfield is a US winding machine company manufacturing medium to large capacity winding machines.

  U.S.A. 7-D13
 
BTSR INTERNATIONAL SPA

BTSR INTERNATIONAL SPA

Producer of WIRE TENSION FEEDING devices -Innovative patents assure a DUAL CLOSED CONTROL LOOP.

  ITALIA 6-A22/6-B23
 

C BRANDAUER & CO LTD

  REGNO UNITO 8-B31
 
C.D. Wälzholz KG

C.D. WÄLZHOLZ KG

Electrical Steel - Non Grain Oriented, Fully Finished

  GERMANIA 5-D32/5-D34/5-E31/5-E33
 
C.D.TECNOLOGIE S.r.l.

C.D.TECNOLOGIE S.R.L.

Machines and accessories for the winding field. Macchine ed accessori per l'avvolgimento elettrico.

  ITALIA 6-B08/6-C09
 
C.M. Srl

C.M. SRL

Equipments and toolings for electric motor and alternator production

  ITALIA 5-C08/5-D07
 
C.R. Tranciatura

C.R. TRANCIATURA

Construction of stamping, laminations/ stators and rotors packages, die cast rotors

  ITALIA 6-C05/6-D04
    Represented by: TOMET
 
CalPower srl

CALPOWER SRL

CalPower distributes test & measurement instruments for metrology,laboratory,process and testing.

  ITALIA 8-A03
 
Came spa

CAME SPA

Windings, die-casts, finished die-cast and assembly

  ITALIA 5-B20/5-B22/5-C19/5-C22
 
CASTECH

CASTECH

Connecting and insulating technologies

  ITALIA 5-E28
 
CEIA SPA - INDUCTION HEATING SYSTEMS

CEIA SPA - INDUCTION HEATING SYSTEMS

Induction Heating systems and optical pyrometers for soldering-brazing of copper, steel, aluminium

  ITALIA 7-B09
 

CHROMIUMTRADE SA

  ITALIA 8-B27
 
CIBAS

CIBAS

CIBAS - Engineering and Producing Permanent Magnets Since 1920

  ITALIA 5-A05/5-A07
 
Cofili

COFILI

Linear winding machines, production lines of electric motors and auxiliary equipments

  ITALIA 7-B40/7-C40/7-C41
 
Col-Silvio Colombo Bearings

COL-SILVIO COLOMBO BEARINGS

Silvio Colombo è un’azienda specializzata nella progettazione, produzione e vendita di cuscinetti.

  ITALIA 8-C34
 
COMSOL S.r.l.

COMSOL S.R.L.

Software di simulazione multifisica

  ITALIA 8-D05
 
copperING

COPPERING

copperING provides the necessary equipment for all processes of the production of universal motors

  GERMANIA 7-A32/7-B33
 
COROTRAT Resistance Welding Technology

COROTRAT RESISTANCE WELDING TECHNOLOGY

Produzione e commercializzazione di macchine e componenti per la saldatura per resistenza.

  ITALIA 7-D10
 
Corrada S.p.A.

CORRADA S.P.A.

Carbide dies

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
    Represented by: EURO GROUP S.P.A.
 
Cottrell Paper Company

COTTRELL PAPER COMPANY

Cottrell Paper Company manufacturers electrical insulating papers for both transformers and motors.

  U.S.A. 8-C15
 
Coveme spa

COVEME SPA

Flexible electrical insulation materials for motors, alternators, generators and transformers.

  ITALIA 5-B06
 
Cronomaster Servizi Srl

CRONOMASTER SERVIZI SRL

IL COLLAUDO NON È PIÙ UN COSTO QUANDO È AL PASSO CON LA VOSTRA PRODUZIONE.

  ITALIA 8-A06/8-A08
 
CSC Group

CSC GROUP

Electrical steel producer

  TAIWAN 5-C12/5-D11
    Represented by: ARDEMAGNI S.P.A.
 
CST – Computer Simulation Technology GmbH

CST – COMPUTER SIMULATION TECHNOLOGY GMBH

CST – Computer Simulation Technology GmbH 3D electromagnetic field simulation

  GERMANIA 6-A30
 
CTP

CTP

CTPsrl is a specialized company in the manufacture of electric and insulated conductors for electrom

  ITALIA 5-E23
 
CUNEXT GROUP

CUNEXT GROUP

CUNEXT GROUP is a spanish business group that transforms copper and aluminum of highest quality

  SPAGNA 5-D02
 
CW BEARING

CW BEARING

Precision ball bearings

  GERMANIA 5-C34
 
DASOTEC S.r.l.

DASOTEC S.R.L.

-

  ITALIA 8-C12/8-D11
 
DE ANGELI PRODOTTI

DE ANGELI PRODOTTI

Enamelled copper and aluminium wire

  ITALIA 5-A23/5-A25/5-A27
    Represented by: SYSTEM P
 
DELL'ERBA SRL

DELL'ERBA SRL

Electromechanical materials and componets for industrial electric motors

  ITALIA 5-C14
 
Dema Sassi

DEMA SASSI

Stacking and special machines

  ITALIA 5-B12/5-C11
 
Demak S.r.l.

DEMAK S.R.L.

Manufacturers of Advanced Resin Dispensing equipment for open air or vacuum casting.

  ITALIA 7-A28/7-B29
 
Deserti Meccanica

DESERTI MECCANICA

freni elettromagnetici - electromagnetic brakes

  ITALIA 6-C15
 

DIASOL SRL

  ITALIA 7-B31
 
DITH

DITH

Electrical Steel

  SVIZZERA 5-C12/5-D11
    Represented by: ARDEMAGNI S.P.A.
 
DMG meccanica Srl - Member of GROB Group

DMG MECCANICA SRL - MEMBER OF GROB GROUP

Stator winding equipment for electric motors and automotive alternators.

  ITALIA 5-A08/5-A10/5-B07/5-B09
 
DOMEL, d.o.o.

DOMEL, D.O.O.

Electrical steel laminations. Overmoulded stator and rotor stacks. BMC thermosetting components.

  SLOVENIA 5-A02/5-A04
 
Dow Italia Divisione Commerciale Srl

DOW ITALIA DIVISIONE COMMERCIALE SRL

Polyurethane potting resins for electrical and electronic components

  ITALIA 7-B25
    Represented by: JOINTEC SRL
 
Dr. - Ing. Ernst Braun GmbH

DR. - ING. ERNST BRAUN GMBH

Development of Electrical Machines

  GERMANIA 5-A32/5-A34/5-B31/5-B33
    Represented by: KIENLE + SPIESS GMBH
 
E.D.C. Srl

E.D.C. SRL

Laboratory and Production Testing Equipment for Stators, Rotors, Armatures, DC/AC/Brushless Motors

  ITALIA 6-D22
 

E.GO SRL

  ITALIA 7-A17/7-A19
 
El.Ins. Electronic Instruments

EL.INS. ELECTRONIC INSTRUMENTS

Normative Safety and Functional Testing for Motors > Stators > Coils and Windings. Since 1990

  ITALIA 7-A14
 
ELANTAS Europe SRL

ELANTAS EUROPE SRL

Varnishes, resins, compounds, wire enamels and insulating products

  GERMANIA 6-C22/6-D23
 
Electroterni S.p.A.

ELECTROTERNI S.P.A.

Toroidal cores, "C" cores and Block cores. Cores for transformers low, medium and high power.

  ITALIA 6-B41
 
Elektrisola

ELEKTRISOLA

Producer of fine and ultrafine enamelled copper wire and many other metals. Producer of Litz wire

  ITALIA 5-B02
 
ELETTRO 2 Srl

ELETTRO 2 SRL

Robotic systems

  ITALIA 5-C24
 
Elettrofili S.p.A.

ELETTROFILI S.P.A.

Enamelled copper and aluminium wires, Litz wire, flat wires.

  ITALIA 5-D23
 
Elettromeccanica ECC Spa

ELETTROMECCANICA ECC SPA

Distributor of Electromechanical Products for Printed Circuit, Automation, Control and Power

  ITALIA 6-C07
 
Elettromeccanica Garimberti

ELETTROMECCANICA GARIMBERTI

Produzione di avvolgimenti elettrici speciali di qualità

  ITALIA 8-C31
 
Elettromeccanica Tarcisio Pugni Srl

ELETTROMECCANICA TARCISIO PUGNI SRL

avvolgimenti/windings motovibratori/vibrators lavorazioni meccaniche/metalworks service e vendita

  ITALIA 6-A09
 
ELINAR-COGEBI GROUP

ELINAR-COGEBI GROUP

VPI & RR mica insulating materials for HV & LV rotating electric machines & fire resistant cables.

  REPUBBLICA CECA 7-C31
 
EL-MI SRL

EL-MI SRL

Production of customized asynchronous electric motors, stators with windings and machined rotors.

  ITALIA 7-B12/7-B14
 
ELMOTEC-STATOMAT

ELMOTEC-STATOMAT

Winding and Assembling Systems

  GERMANIA 5-C30/5-D29
    Represented by: STATEC S.R.L.
 
ELSAN

ELSAN

Aluminium and Copper round and rectangular enamelled wire, CTC products, Paper coated wire products

  TURCHIA 5-B03
 
EMB Elektromaschinenbau GmbH

EMB ELEKTROMASCHINENBAU GMBH

Development of innovative motors in highly demanding applications. Prototyping and small series.

  GERMANIA 8-A05
 
EN4

EN4

EN4 develops test benches for automotive, manufacturing, mechanical, electromechanical industry

  ITALIA 6-B31
 
Erba Isolanti Srl

ERBA ISOLANTI SRL

Electrical insulating materials, adhesive components, insulating varnishes, resins and adhesives.

  ITALIA 7-B19
 
Erich Grau GmbH

ERICH GRAU GMBH

Precise laser cutting for prototypes and small batches

  GERMANIA 8-A26
 
ERIKOGLU ENAMELLED COPPER WIRE CO.

ERIKOGLU ENAMELLED COPPER WIRE CO.

Enamelled Copper Wire and Aluminum Enameled Wire producer in Turkey.

  TURCHIA 5-B24
 
ERNESTO MALVESTITI SPA

ERNESTO MALVESTITI SPA

High precision die-making and production of blanked pieces

  ITALIA 5-D30/5-E29
 
ERNESTO RAAB SRL

ERNESTO RAAB SRL

Commercio all’ingresso di cuscinetti a sfere ed articoli tecnici

  ITALIA 5-A23/5-A25/5-A27
    Represented by: SYSTEM P
 
Essex Italy

ESSEX ITALY

Copper enamelled wire,Bare and Insulated Flat wire, Continuously Transposed Cables.

  FRANCIA 5-C13/5-C15
 
Euro Group S.p.A.

EURO GROUP S.P.A.

Your partner for electric motors and generators

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
 
EUROCABLAGGI SRL

EUROCABLAGGI SRL

CABLAGGI ELETTRICI, RESINATURA,MOTORI ELETTRICI, QUADRI ELETTRICI E ASSEMBLAGGI ELETTROMECCANICI

  ITALIA 7-D23
 
Euroslot S.p.A.

EUROSLOT S.P.A.

Blanked and notched laminations

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
    Represented by: EURO GROUP S.P.A.
 
Eurotranciatura S.p.A.

EUROTRANCIATURA S.P.A.

Electrical steel laminations

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
    Represented by: EURO GROUP S.P.A.
 
F.lli MOTTA s.r.l.

F.LLI MOTTA S.R.L.

Stampi-stampaggio materie plastiche-rocchetti-accessori trasformatori-moulds-moulding-coilformers

  ITALIA 6-A33
 
FAET srl

FAET SRL

The leading Italian company in the market of electromechanical and electro-technical components.

  ITALIA 5-A24/5-A26/5-A28/5-B23/5-B25/5-B27
 
FASP TECNOLOGIE PER MOTORI ELETTRICI

FASP TECNOLOGIE PER MOTORI ELETTRICI

High performance technologies for electric motors. Winding and assembling systems.

  ITALIA 5-B38
 
FAVI S.A

FAVI S.A

The Worldwide leader in copper alloys pressure die-casting

  FRANCIA 6-A39
 
FILMCUTTER SpA

FILMCUTTER SPA

Manufacturer of flexible insulation laminates.

  ITALIA 5-A03
 
FOX-MECC

FOX-MECC

Banding machines for rotors, Magnets applicator standard Glue applicator for brushless engine rotors

  ITALIA 5-B30/5-B32/5-B34/5-C29/5-C31/5-C33
    Represented by: MIOTTI RAPPRESENTANZE SRL
 
Fratec AG

FRATEC AG

Inuslation Tapes; Woven Glass Tapes, Woven Polyster Tapes, Cotton Tapes, Glasscords,Glassleevings,

  SVIZZERA 8-B13
 
Friedrich Nettelhoff GmbH

FRIEDRICH NETTELHOFF GMBH

At Nettelhoff everything revolves around commutators.

  GERMANIA 8-C11
 
FVZ

FVZ

FVZ - Winding, Insulating, lacing and Forming Machine for the electric motor assembly

  ITALIA 8-A25
 
Gamma S.p.A.

GAMMA S.P.A.

Insulating materials for motors and generators

  ITALIA 6-B29
 
GARNET Srl

GARNET SRL

Components and equipments for electric motors

  ITALIA 6-A12/6-B13
 
GDG Gerätebau GmbH

GDG GERÄTEBAU GMBH

Design and manufacturing of full-automatic and semi-automatic testsystems for armatures and stators.

  GERMANIA 7-C28/7-C30
 
GMB Deutsche Magnetwerke GmbH

GMB DEUTSCHE MAGNETWERKE GMBH

We manufacture custom-designed cast and finished AlNiCo magnets in a great variety of formats

  GERMANIA 6-A35
 
GOLDEN HOUSE srl

GOLDEN HOUSE SRL

COPPER & ALUMINIUM ENAMELLED WIRE

  ITALIA 5-A24
 
Grassi Trade S.r.l.

GRASSI TRADE S.R.L.

Macchine ed automazioni, nuove e ricondizionate, per avvolgimenti elettrici e saldature

  ITALIA 5-C04/5-D03
 
Grau Stanzwerk

GRAU STANZWERK

Precise laser cutting for prototypes and small batches

  GERMANIA 8-A04
    Represented by: WALTER WIDMANN GMBH
 
HCH Bearing Italy Srl

HCH BEARING ITALY SRL

Manufacturer and supplier of high quality deep groove ball bearings and tapered roller bearings.

  ITALIA 6-A01
 
HEDRICH GROUP

HEDRICH GROUP

Vacuum Equipment for cast resin insulation and for oil- paper insulation, moulds & clamping machines

  GERMANIA 7-B40/7-C40/7-C41
    Represented by: COFILI
 
Hidria Rotomatika d.o.o.

HIDRIA ROTOMATIKA D.O.O.

el. steel laminations, stators and rotors stacks, die casted rotors, fine blanking parts

  SLOVENIA 7-C37/7-C39
 
HIOKI E.E. CORPORATION

HIOKI E.E. CORPORATION

Electrical instrumentation, oscilloscope, components for automation and energy conservation systems.

  GIAPPONE 6-C32
    Represented by: ASITA
 
HUBER + SUHNER

HUBER + SUHNER

Cables for coil-winding industry, railway and automotive

  GERMANIA 5-B30/5-B32/5-B34/5-C29/5-C31/5-C33
    Represented by: MIOTTI RAPPRESENTANZE SRL
 
HÜBERS Verfahrenstechnik

HÜBERS VERFAHRENSTECHNIK

Specialist In Resin Casting and Impregnating Technology

  GERMANIA 6-B22
 
IDI Fabrication EMT GmbH

IDI FABRICATION EMT GMBH

Manufacturers, Fabricators and Distributors of Insulating Materials. From Rolls to Tapes to Parts!

  AUSTRIA 6-A37
 
IDROCALOR SRL

IDROCALOR SRL

Manufacturer of batch and continuous ovens,customized ind. plants,vacuum systems,painting plants.

  ITALIA 7-D21
 
IEEGROUP - Industrie Elettromeccaniche Europee

IEEGROUP - INDUSTRIE ELETTROMECCANICHE EUROPEE

Costruzione, Manutenzione e Riparazione di Motori e Generatori in Media e Alta Tensione

  ITALIA 6-D33
 
Inarca spa

INARCA SPA

Terminals, connectors, equipment, solderless magnet wire connections to Copper,Aluminum and CCA wire

  ITALIA 6-C08/6-D09
 
INDUSTRIE RESINE STAMPATE - TRANSFORMER'S FIXING SYSTEM

INDUSTRIE RESINE STAMPATE - TRANSFORMER'S FIXING SYSTEM

Support systems in technopolymer for transformers and accessories. Supporti per trasformatori.

  ITALIA 8-D13
 
Ing. Brizio Basi & C.

ING. BRIZIO BASI & C.

VPI impregnation systems. Oil treatment Systems. Impianti d'impregnazione. Impianti trattamento

  ITALIA 7-D40
 
Ingrid West Machinery Ltd

INGRID WEST MACHINERY LTD

Winding machines for round and flat wires as well as foil

  REGNO UNITO 5-D04/5-E03
 
INOTAL Aluminium

INOTAL ALUMINIUM

Inotal produces aluminium wire rods, drawn wires and strips with short lead-times.

  UNGHERIA 6-D25
 
Intesys Srl

INTESYS SRL

Sistemi di collaudo per motori elettrici, inverter, pompe, ventilatori, generatori/UPS/alternatori

  ITALIA 8-A12
 
IRCE SPA

IRCE SPA

Winding wires, insulated electrical cables for the transport of energy, moulded plug cords.

  ITALIA 5-D06/5-D08/5-E05/5-E07
 
ISB Bearings and Components

ISB BEARINGS AND COMPONENTS

ISB is a factory brand specialized in the supply of industrial components.

  ITALIA 6-B07
 
ISCRA dielectrics

ISCRA DIELECTRICS

Insulating and soldering materials, adhesive tapes, resins, fluid dispensing machines,MMD equipement

  ITALIA 5-B14/5-B16
 
ITAL-CAP S.R.L. - XENON

ITAL-CAP S.R.L. - XENON

Circuit Breakers - Disgiuntori Elettronici/Elettromeccanici

  ITALIA 6-A38
 
Italgard Srl

ITALGARD SRL

Stampi-Stampaggio lamiera Copriventola per motori elettrici Carpenteria leggera Verniciatura

  ITALIA 7-D27
 
IWT Industrielle Wickeltechnik

IWT INDUSTRIELLE WICKELTECHNIK

Winding machines for all materials Self bonding wire machines Foilwind. Machines Transf. Core wel

  GERMANIA 5-D16
 

JINAN STO MACHINERY CO.,LTD

  CINA 7-A38/7-B39
 
Jointec Srl

JOINTEC SRL

Distribution of specialty chemicals: elastomers & resins for electrical and electronic applications

  ITALIA 7-B25
 

KEEN OCEAN INDUSTRIAL LTD.

  HONG KONG 7-C09
 
Kienle + Spiess GmbH

KIENLE + SPIESS GMBH

Kienle + Spiess offers the latest stamping and die-casting technologies for efficient machines.

  GERMANIA 5-A32/5-A34/5-B31/5-B33
 

KIENLE + SPIESS HUNGARY

  UNGHERIA 5-A32/5-A34/5-B31/5-B33
    Represented by: KIENLE + SPIESS GMBH
 
KISTLER ITALIA SRL

KISTLER ITALIA SRL

Manufacturer of electric joining systems and monitoring equipment for the quality in the production.

  ITALIA 5-A17
 
KOLEKTOR group

KOLEKTOR GROUP

KOLEKTOR is a world-wide provider of magnetic subsystems,drives, commutators, plastic hybrid parts.

  SLOVENIA 5-C01/5-C02
 
Krempel Group

KREMPEL GROUP

electrical insulation materials

  GERMANIA 7-B19
    Represented by: ERBA ISOLANTI SRL
 
Kurt Maier Motor-Press GmbH

KURT MAIER MOTOR-PRESS GMBH

Components for Electric Motors in frame size 56-400 in alu & cast-iron Forced Ventilation Units IP6

  GERMANIA 7-C32/7-D33
 
L.Pi.Emme srl

L.PI.EMME SRL

Copper wire enameled, paper, Nomex, mica insulated. Aluminum wire enameled. Sleevings. Copper bars

  ITALIA 6-D06/6-D08/6-D10/6-D12
 
LA MISOLET Srl

LA MISOLET SRL

Lavorazione materiale isolante elettrico e termico

  ITALIA 6-A40
 
Laboratorio Elettrofisico

LABORATORIO ELETTROFISICO

Specialized in engineering, designing, and manufacturing precise magnetizing and measuring equipment

  ITALIA 6-A08/6-B09
 
LAMAG s.p.a.  Electrical steel

LAMAG S.P.A. ELECTRICAL STEEL

Electrical steel service center. Distribution of electrical steel in coils, strips, sheets.

  ITALIA 5-D24
 

LAMCOTECH SRL

  ITALIA 6-B05
 
LAMPAR-MONZA

LAMPAR-MONZA

Carbon brushes,standard and special brushholders,pumice-stone and rubbers,collectors and slip rings

  ITALIA 5-D18/5-E17
 
LCD LaserCut AG

LCD LASERCUT AG

Driving Innovation - Stator and rotor stacks for prototyping and small series

  SVIZZERA 5-D31/5-D33
 
LEGNANO TEKNOELECTRIC COMPANY SpA

LEGNANO TEKNOELECTRIC COMPANY SPA

Cores and laminations for transformers and reactors, made from GO and NGO electrical steel

  ITALIA 6-B36/6-B37/6-B39/6-B39
 
Limitor GmbH

LIMITOR GMBH

Current/temperature limiter and controller-thermal cut offs-timers and protectors-insulating sleeves

  ITALIA 6-C16
 
LJU Sondermaschinenbau GmbH

LJU SONDERMASCHINENBAU GMBH

Universal type winding system for round- and flat wire; Free programmable electronic tensioner; Fl

  GERMANIA 5-E12/5-E14
 
M.B.I. METAL BUSHINGS ITALIA SPA

M.B.I. METAL BUSHINGS ITALIA SPA

Ball Bearings for Electro Motors Appliances and Sliding Bushings

  ITALIA 6-D07
 
M.P.I. MAGNETI PERMANENTI INDUSTRIALI SRL

M.P.I. MAGNETI PERMANENTI INDUSTRIALI SRL

All What You Need In The World Of Magnets!

  ITALIA 6-C01
 
MAFEL S.r.l.

MAFEL S.R.L.

Enamelled copper wires, electrical insulating materials, cable, adhesive components, varnishes

  ITALIA 5-E19/5-E21
 
MAGNET-PHYSIK Dr. Steingroever GmbH

MAGNET-PHYSIK DR. STEINGROEVER GMBH

Magnetizing and magnetic measuring equipment and service, shaping technique, calibration laboratory

  GERMANIA 5-E15
 
MAGSYS magnet systeme GmbH

MAGSYS MAGNET SYSTEME GMBH

Production of magnetic systems and magnetic measuring instruments.

  GERMANIA 8-B08
 
MARINONI SRL

MARINONI SRL

Blanking and assembly laminations for transformers and related

  ITALIA 6-B04
 
MARSILLI S.p.A.

MARSILLI S.P.A.

Worldwide leader in Coil and Motor Winding and Assembly Systems with a strong ability to innovate.

  ITALIA 5-C16/5-C18/5-D15/5-D17
 
MARTY S.n.c.

MARTY S.N.C.

Resin dispensing machineries

  ITALIA 5-B14/5-B16
    Represented by: ISCRA DIELECTRICS
 
MCE srl

MCE SRL

Coil winding machines

  ITALIA 5-C37
 
METECH srl

METECH SRL

Impregnation systems

  ITALIA 6-C18/6-C20
 
METRA S.p.A.

METRA S.P.A.

Blanked magnetic laminations and die-casting rotors

  ITALIA 5-C20/5-C22/5-D19/5-D21
 
Metrolab Technology SA

METROLAB TECHNOLOGY SA

- NMR Precision Magnetometers - Three-axis Hall Magnetometers

  SVIZZERA 7-C24
 
MICAMATION AG

MICAMATION AG

World's leading manufacturer of insulating machines for the electrical industry

  SVIZZERA 7-B37
 
Microline

MICROLINE

Microline progetta e produce banchi di collaudo elettrico e funzionale per produzione e laboratorio

  ITALIA 7-D15
 
Microtherm GmbH

MICROTHERM GMBH

Thermal protectors, temperature controllers, thermal fuses, thermal probes, current limiters

  ITALIA 6-A13/6-A15
 
MIDEL

MIDEL

Ester-based dielectric fluids for utilities and transformer manufacturers

  REGNO UNITO 7-B19
    Represented by: ERBA ISOLANTI SRL
 
MIOTTI RAPPRESENTANZE srl

MIOTTI RAPPRESENTANZE SRL

Componenti per motori elettrici dal 1952

  ITALIA 5-B30/5-B32/5-B34/5-C29/5-C31/5-C33
 
MKM

MKM

  5-A20/5-A22
    Represented by: BENNETT
 
M-Pulse

M-PULSE

Impulse magnetizers, Magnetizing coils, Calibration equipment, Fluxmeter + Helmholtz coils Rotorscan

  GERMANIA 5-A11
 
MR CORES Srl

MR CORES SRL

Blanking laminations for electrical transformers

  ITALIA 6-B41
    Represented by: ELECTROTERNI S.P.A.
 
MS-Schramberg GmbH & Co. KG - Magnetic and Plastics Technology

MS-SCHRAMBERG GMBH & CO. KG - MAGNETIC AND PLASTICS TECHNOLOGY

Permanent magnets materials sintered, plastic bonded versions and magnet assemblies

  GERMANIA 6-D26
 
Nestech srl

NESTECH SRL

Produzione di pacchi lamellari e semilavorati vari per motori e generatori elettrici.

  ITALIA 7-C25
 
New England Wire Technologies

NEW ENGLAND WIRE TECHNOLOGIES

Litz Wire, Multi conductor, Insulated Litz Wire, Medical Cable, Braid, Super Conductor, Hybrid Cable

  U.S.A. 6-C07
    Represented by: ELETTROMECCANICA ECC SPA
 
NIDE MECHANICAL EQUIPMENT

NIDE MECHANICAL EQUIPMENT

Covering motor manufacturing machinery, commutator,ball bearing and carbon brush

  CINA 5-B01
 
Ningbo Garnet Magnets & Motion Solutions Co. Ltd.

NINGBO GARNET MAGNETS & MOTION SOLUTIONS CO. LTD.

Supply of rare earth permanent magnets, sintered magnets, magnetic assemblies and plasto-magnets

  CINA 6-A12/6-B13
    Represented by: GARNET SRL
 
NINGBO PERMANENT MAGNETS CO.LTD

NINGBO PERMANENT MAGNETS CO.LTD

Permanent magnets

  CINA 7-D24
 
NIPPON RIKA INDUSTRIES CORPORATION

NIPPON RIKA INDUSTRIES CORPORATION

Insulating material producer - Coil manufacturing machinery provider(NRVI - Bartech - Micamation)

  AUSTRIA 7-A12
 
Nittoku Europe GmbH

NITTOKU EUROPE GMBH

The worldwide biggest company in coil and motor winding machines and automatic assembling systems.

  GERMANIA 6-B12/6-C13
 
NPF Nuova Presso Fondal SpA

NPF NUOVA PRESSO FONDAL SPA

Aluminium die casting components for electric motors, pumps, generators from IEC 50 up to IEC 200

  ITALIA 5-D26/5-D28/5-E25/5-E27
 
Nuova FA.PI.VE. S.r.l.

NUOVA FA.PI.VE. S.R.L.

Transformer cores

  ITALIA 5-A23/5-A25/5-A27
    Represented by: SYSTEM P
 
O.M.E.M. Spa

O.M.E.M. SPA

Magnetic cores for transformers and other applications FeSi, FeNi, Nanocristalline of any shape

  ITALIA 5-C23
 
Off. Mecc. Dalla Benetta Silvano S.r.l.

OFF. MECC. DALLA BENETTA SILVANO S.R.L.

Progettazione e costruzione macchine utensili ed attrezzature per la lavorazione di motori elettrici

  ITALIA 6-C26/6-D27
    Represented by: PROJECT AUTOMATION SRL
 
OMICRON electronics GmbH

OMICRON ELECTRONICS GMBH

Serves the electrical power industry with innovative products and services for analysis of assets.

  AUSTRIA 7-C12
    Represented by: OMICRON LAB
 
OMICRON Lab

OMICRON LAB

Is a division of OMICRON electronics specialized on insulation material & electronic analysis.

  AUSTRIA 7-C12
 
OMM2 DI PELOSO GIANNANTONIO

OMM2 DI PELOSO GIANNANTONIO

Welding of stacked laminations for electric motors

  ITALIA 5-A15
 
ORIENTAL MOTOR ITALIA SRL

ORIENTAL MOTOR ITALIA SRL

Costruttore Giapponese di motori elettrici brushless,induzione, passo passo,assi lineari e rotativi.

  ITALIA 8-A07
 
ORTADOGU RULMAN SANAYI VE TICARET A.S.

ORTADOGU RULMAN SANAYI VE TICARET A.S.

  TURCHIA 6-D07
    Represented by: M.B.I. METAL BUSHINGS ITALIA SPA
 
OSR srl

OSR SRL

Shafts and worm profiles for electrical motors - Alberi e viti senza fine per motori elettrici

  ITALIA 8-B32
 
OXYWELD SNC

OXYWELD SNC

Italian leader manufacturer of oxyhydrogen gas generators for brazing and welding.

  ITALIA 6-A17/6-A19
 
pegaso cablaggi industriali

PEGASO CABLAGGI INDUSTRIALI

Industrial electric wiring for transformers, motors, pumps and other electro-mechanical applications

  ITALIA 6-B06
 
PHOENIX CONTACT

PHOENIX CONTACT

Phoenix Contact è leader mondiale per i componenti elettronici e soluzioni d'automazione.

  ITALIA 8-B26/8-C27
 
PLD Collettori snc

PLD COLLETTORI SNC

COMMUTATORS FOR ELECTRICAL MOTORS AND GENERATORS

  ITALIA 7-C25
    Represented by: NESTECH SRL
 
Politubes S.r.l.

POLITUBES S.R.L.

An Italian company specialized in the manufacturing of spiral wound multilayers tubes and endcaps

  ITALIA 5-A24/5-A26/5-A28/5-B23/5-B25/5-B27
    Represented by: FAET SRL
 
Precision Pressing Manufacturers

PRECISION PRESSING MANUFACTURERS

PPM is a manufacturer of magnetic steel laminations based out of Pune, automotive capital of India

  INDIA 7-D25
 
Project Automation Srl

PROJECT AUTOMATION SRL

Sistemi e impianti robotizzati per assemblaggi industriali Linee automatiche di avvolgimento stator

  ITALIA 6-C26/6-D27
 

PROMECO O?

  ESTONIA 8-C14
 
PROSYS Sa

PROSYS SA

Innovative Winding and assembly systems for coils,transformers generators and motors

  FRANCIA 6-B26/6-C27
 
PVS-Kunststofftechnik GmbH & Co. KG

PVS-KUNSTSTOFFTECHNIK GMBH & CO. KG

Injection molding; Plastic insulation by overmolding stators, rotors, stator segments

  GERMANIA 5-E18
 
R&D Components

R&D COMPONENTS

Thermal protection and components for electromechanical and appliance

  ITALIA 5-A21
    Represented by: TMC SENSORTECHNIK GMBH
 
r. bourgeois

R. BOURGEOIS

Rotor, stator and transformers lamination

  FRANCIA 5-A23/5-A25/5-A27
    Represented by: SYSTEM P
 
Reissmann Sensortechnik GmbH

REISSMANN SENSORTECHNIK GMBH

Application-oriented solutions,sensors, electronic devices,cable technology,PT-KTY Converter

  GERMANIA 6-D01
 

REMATO ELEKTRONIK MAKINE SAN. VE TIC. LTD. STI.

  TURCHIA 7-D17/7-D19
 
Rembrandtin Lack GmbH Nfg. KG

REMBRANDTIN LACK GMBH NFG. KG

Rembrandtin is a leading producer of chromium-free and 100% RoHS-compliant core plate varnishes.

  AUSTRIA 7-C16/7-C18
 
RIMAC

RIMAC

Special industrial machinery and equipment for electric motors maintenance and coils manufacturing

  ITALIA 6-A23/6-A25
 
Royal Diamond

ROYAL DIAMOND

Impregnating varnishes, resins, laminates, slot wedges, spray and miscellaneous insulation products.

  SPAGNA 6-A06
 
Rubadue Wire Co., Inc.

RUBADUE WIRE CO., INC.

Manufacturing insulated wire using ETFE, TEFZEL, FEP, TCA, PFA and also Litz Wire.

  U.S.A. 6-C24
 
RUFF GROUP

RUFF GROUP

Toroidal, linear, spiral winding machines. Solder pots.

  GERMANIA 5-C28/5-D27
 
S8 S.R.L. - Advanced Moulding Solution

S8 S.R.L. - ADVANCED MOULDING SOLUTION

Moulding and terminals solutions for your wiring connections

  ITALIA 7-B17
 
SAF S.p.A.

SAF S.P.A.

Laminations and components for small electrical motors

  ITALIA 5-A12/5-A14/5-A18/5-B11/5-B13/5-B17
    Represented by: EURO GROUP S.P.A.
 
Saftty Electronic Technology Co., Limited

SAFTTY ELECTRONIC TECHNOLOGY CO., LIMITED

We are a leading thermal protector manufacturer.We are looking for distributor partner.

  CINA 8-B16
 
Sarkuysan A.S.

SARKUYSAN A.S.

Enamelled copper&aluminium round&flat wire and CTC producer

  TURCHIA 5-C06
 
SAVIPLAST snc

SAVIPLAST SNC

Plastic molding, double-injection molding and thermoplastic molds manufacture

  ITALIA 7-B22
 
Schleich

SCHLEICH

Safety and quality control testing machinery for electrical motors; HV surge and hi-pot testers

  GERMANIA 7-A26/7-B27
    Represented by: VOLTA - SCHLEICH
 
Schunk Carbon Technology

SCHUNK CARBON TECHNOLOGY

Development, manufacture and application of carbon and ceramic Solutions

  ITALIA 6-B30/6-B32/6-C31/6-C33
 
Schwering & Hasse Elektrodraht GmbH

SCHWERING & HASSE ELEKTRODRAHT GMBH

  7-C36/7-C38/7-D36/7-D37/7-D38/7-D39
    Represented by: SYNFLEX
 
SEIPP Handelsgesellschaft für Elektrotechnik mbH

SEIPP HANDELSGESELLSCHAFT FÜR ELEKTROTECHNIK MBH

Wholesaler for motor repair shops, transformer construction and products for the electrical industry

  GERMANIA 6-D32
 
SENIS AG

SENIS AG

Instruments for magnetic field measurement, electric current measurement, Engineering service

  SVIZZERA 5-E15
    Represented by: MAGNET-PHYSIK DR. STEINGROEVER GMBH
 
SEREM

SEREM

SEREM has been developing modular solutions for the test of coil winding products since 1983.

  FRANCIA 6-A27
 
SGM TECHNICAL PRODUCTS ITALIA s.r.l.

SGM TECHNICAL PRODUCTS ITALIA S.R.L.

Technical products for electrical motors

  ITALIA 5-C32
 
Sichuan Dongfang Insulating Material Co., Ltd.

SICHUAN DONGFANG INSULATING MATERIAL CO., LTD.

Dongfang focuses on the R&D and manufacturing of electrical insulating materials. Your One Source!

  CINA 6-A37
    Represented by: IDI FABRICATION EMT GMBH
 
SIGI srl

SIGI SRL

Produttore di tubetti isolanti / Insulating sleeving manufacturer

  ITALIA 5-B29
 
SIJ ACRONI D.O.O.

SIJ ACRONI D.O.O.

Steel producer SIJ ACRONI is known for quality and reliability of SIWATT NGO electrical steel.

  SLOVENIA 7-B30
 
SIPRO SRL

SIPRO SRL

Winding and finishing machines for coil and motors manufacturing

  ITALIA 5-B19/5-B21
 
Sisram SpA

SISRAM SPA

Distribution with technical assistance of materials and components for industrial applications

  ITALIA 6-A24/6-A26/6-B25/6-B27
 
Sitem Spa

SITEM SPA

Std IEC-custom designed blanked laminations die cast rotors die cast aluminium housings-end shields

  ITALIA 5-B26/5-B28/5-C25/5-C27
 

SITEM SRL

  ITALIA 7-A16/7-A18
 
SP.EL.CO srl

SP.EL.CO SRL

Grain oriented silicon steel tape wound cores

  ITALIA 5-A13
 
Specialacciai S.p.A.

SPECIALACCIAI S.P.A.

PRODUCERS OF TRANSFORMERS CORES AND LAMINATIONS

  ITALIA 7-A22/7-B23
 
SPIN APPLICAZIONI MAGNETICHE SRL

SPIN APPLICAZIONI MAGNETICHE SRL

Design and software for electromechanical devices, multidisciplinary analysis, prototypes.

  ITALIA 6-C12/6-D13
 
STATEC s.r.l.

STATEC S.R.L.

Winding and Assembling Systems

  ITALIA 5-C30/5-D29
 
STIEFELMAYER-LASERTECHNIK

STIEFELMAYER-LASERTECHNIK

Lamination shop for electric motors – Laser cutting and welding machines for laminations

  GERMANIA 5-C03
 
STOCKMEIER URETHANES

STOCKMEIER URETHANES

Stobicast® - polyurethane potting compounds for electrical engineering and electronics

  GERMANIA 6-A24/6-A26/6-B25/6-B27
    Represented by: SISRAM SPA
 
Strunk Connect GmbH & Co. KG

STRUNK CONNECT GMBH & CO. KG

Complete welding and joining technologies from a single source.

  GERMANIA 5-A29/5-A31
 
SWD AG Stator- und Rotortechnik

SWD AG STATOR- UND ROTORTECHNIK

SWD AG Stator- und Rotortechnik is your partner for your next generation of electric motors.

  SVIZZERA 5-E20
 
SYNFLEX

SYNFLEX

Winding wires, Insulating materials, Electrical adhesive tapes.

  ITALIA 7-C36/7-C38/7-D36/7-D37/7-D38/7-D39
 
System P

SYSTEM P

Enamelled copper and aluminium wire, rotors, stators and transformers laminations

  ITALIA 5-A23/5-A25/5-A27
 
T.M.A. SPA

T.M.A. SPA

Windings for Electric pumps of various kinds, motors for machines used in the building industry

  ITALIA 6-A14/6-A16/6-B15/6-B17
 
Tamagawa Seiki Co. Ltd.

TAMAGAWA SEIKI CO. LTD.

Manufacture of resolvers, encoders, tachogenerators and sensors

  GIAPPONE 6-A12/6-B13
    Represented by: GARNET SRL
 
TE CONNECTIVITY - Tyco Electronics AMP Italia Srl

TE CONNECTIVITY - TYCO ELECTRONICS AMP ITALIA SRL

For all you design,TE Connectivity makes the connectivity and sensor solutions to meet your needs.

  ITALIA 8-B06/8-C05
 
TECNOFIRMA SPA

TECNOFIRMA SPA

Automatic impregnation machines for coil winding : Trickling, Roll Dip, Dipping technologies.

  ITALIA 6-D24
 
Tecnomatic SPA

TECNOMATIC SPA

Leader in hairpin technology to realize the world’s most efficient electric traction motors.

  ITALIA 6-B01
 
Teleco Freni srl

TELECO FRENI SRL

Electromagnetic d.c. Spring Pressure Safety Brakes

  ITALIA 7-C08/7-D09
    Represented by: TEST LINE S.R.L.
 
TELEDYNE LECROY SRL

TELEDYNE LECROY SRL

Motor Drive Analyzers. Digital oscilloscopes. Power analysis. Automotive solutions.

  ITALIA 8-C06
 
TENSITRON

TENSITRON

Precision tension meters , tension transducers, and custom measuring instrumentation. Tensiometri.

  U.S.A. 6-B08/6-C09
    Represented by: C.D.TECNOLOGIE S.R.L.
 
TEST LINE S.r.l.

TEST LINE S.R.L.

Acquisition systems for test benches, automation and end-of-line test systems, quality control

  ITALIA 7-C08/7-D09
 
TEXERA SRL

TEXERA SRL

Texera has a long consolidated experience in the field of ceramic and zirconia thread/roller guides.

  ITALIA 6-C06
 
THERMIK

THERMIK

High quality temperature protection systems for all types of electrical appliances

  GERMANIA 5-B30/5-B32/5-B34/5-C29/5-C31/5-C33
    Represented by: MIOTTI RAPPRESENTANZE SRL
 

THYSSENKRUPP ELECTRICAL STEEL GMBH

Grain oriented electrical steel

  GERMANIA 5-B08/5-C07
    Represented by: THYSSENKRUPP STEEL EUROPE AG
 
thyssenkrupp Steel Europe AG

THYSSENKRUPP STEEL EUROPE AG

Non grain oriented electrical steel

  GERMANIA 5-B08/5-C07
 
TMC Sensortechnik GmbH

TMC SENSORTECHNIK GMBH

Thermal safety cut-out for coil winding protection and sensor for temperature measurement

  GERMANIA 5-A21
 
Tomet

TOMET

Motor shafts. Turning, milling, friction welding, threading, knurling, grinding, rotor balancing

  ITALIA 6-C05/6-D04
 
TONGLING KINGKONG ELECTRONICS TECHNOLOGY CO.,LTD

TONGLING KINGKONG ELECTRONICS TECHNOLOGY CO.,LTD

Professional manufacturer of enameled wires.

  CINA 7-C33
 
Toyo Tanso Europe s.p.a.

TOYO TANSO EUROPE S.P.A.

Carbon brushes Brush holders Mechanical carbons

  ITALIA 8-A42
 
TPC s.r.o.

TPC S.R.O.

Production portfolio of the TPC consists of the coil winding machines and accessories.

  SLOVACCHIA 7-B40/7-C40/7-C41
    Represented by: COFILI
 
Trafoworld

TRAFOWORLD

Media partner

  ITALIA 6-A32
    Represented by: TRAFOWORLD DI L.A.E. SRL
 
TRAFOWORLD di L.A.E. Srl

TRAFOWORLD DI L.A.E. SRL

Marketing services and web portal for professionals working in the transformers field

  ITALIA 6-A32
 
TRANCERIA LIGURE

TRANCERIA LIGURE

Stamping magnetic steel laminations for transformers

  ITALIA 5-D05
 
TRANCERIE EMILIANE

TRANCERIE EMILIANE

Blanked magnetic laminations for electric motors and transformers. Diecasting, slinky, tool building

  ITALIA 6-A18/6-A20/6-B19/6-B21/6-C19/6-C21
 
UJWAL Electrical Stamping Pvt Ltd

UJWAL ELECTRICAL STAMPING PVT LTD

Electrical Stampings and Laminations for: Electrical Motors, Alternators, Switchgears, Automotive.

  INDIA 7-D29/7-D31
 
V&C GmbH

V&C GMBH

Precision Coil Winding Machines

  GERMANIA 6-B24
 
VACUUMSCHMELZE GmbH

VACUUMSCHMELZE GMBH

Soft magnetic alloys, permanent magnets, cores and components

  GERMANIA 6-A24/6-A26/6-B25/6-B27
    Represented by: SISRAM SPA
 
VEGATECHNIK GmbH

VEGATECHNIK GMBH

We are a full magnet solutions provider specialized in casted sintered and bonded permanent magnets

  AUSTRIA 7-A36
 
Vicente Torns Distribution Italia S.r.l

VICENTE TORNS DISTRIBUTION ITALIA S.R.L

Enamelled copper and aluminium wires

  ITALIA 6-A04
 

VICTREX EUROPA GMBH

  GERMANIA 8-B05
 
VMF spa

VMF SPA

Standard production by progressive blanking system and special production by notching system

  ITALIA 5-E30
 
voestalpine Stahl GmbH

VOESTALPINE STAHL GMBH

Electrical Steel

  AUSTRIA 6-C28/6-C30/6-D29/6-D31
 
VOLTA - SCHLEICH

VOLTA - SCHLEICH

Safety and Quality control testing machinery for electrical motors production and repair, dynamic

  ITALIA 7-A26/7-B27
 
Volz Selbstklebetechnik GmbH

VOLZ SELBSTKLEBETECHNIK GMBH

Specialist in adhesive tapes for electrical insulation of transformers, spools and electric motors

  GERMANIA 7-C22
 
Von Roll Insulation

VON ROLL INSULATION

Manufacturing of mica, varnish, resin, slot insulation, Polyglas, adhesive tapes, wires, composites.

  SVIZZERA 8-A10/8-B09
 
Waasner

WAASNER

Transformer Core Laminations,Motor Laminations,strip slitting,Split Tape Cores,Toroidal Tape Cores

  GERMANIA 5-D14
 
Wacker Chemie AG

WACKER CHEMIE AG

WACKER silicone elastomers and resins for electrical equipment and insulation composites

  GERMANIA 7-B25
    Represented by: JOINTEC SRL
 
Walter Widmann GmbH

WALTER WIDMANN GMBH

High grade thermo-plastic parts with molded-in wires or leadframes

  GERMANIA 8-A26
    Represented by: ERICH GRAU GMBH
 
WEISSER SPULENKOERPER

WEISSER SPULENKOERPER

Plastic bobbins, boxes and accessories for different core-types

  GERMANIA 6-A24/6-A26/6-B25/6-B27
    Represented by: SISRAM SPA
 
WEVO-CHEMIE GmbH

WEVO-CHEMIE GMBH

WEVO-CHEMIE develops and manufactures casting, bonding and sealing solutions

  GERMANIA 5-D20/5-D22
 
WKT Plastic Technologies

WKT PLASTIC TECHNOLOGIES

WKT is a leading manufacturer of insulation components, e.g. polyester and epoxy laminates.

  GERMANIA 7-C20
 
YOKOGAWA ITALIA srl

YOKOGAWA ITALIA SRL

Test & Measurement instrumentation. Power meters for Test systems for motors, Oscilloscopes

  ITALIA 7-A15
 
ZAGO PIETRO SRL

ZAGO PIETRO SRL

Production of shafts for small motors and grinding pins upon client specification.

  ITALIA 7-B08
 
ZES ZIMMER GmbH

ZES ZIMMER GMBH

Precision measurement of power, energy, TRMS values, harmonics, flicker, conformity test systems.

  GERMANIA 8-A03
    Represented by: CALPOWER SRL
 
Zhejiang Sheensen Magnetics Technology CO.,LTD

ZHEJIANG SHEENSEN MAGNETICS TECHNOLOGY CO.,LTD

A manufacturer specializing in permanent magnet production

  CINA 8-A09
 
ZML Industries SpA

ZML INDUSTRIES SPA

ZML Industries SpA produce filo in CU e AL smaltato da oltre 40 anni per tutte le applicazioni

  ITALIA 8-B38
 
Vuoi parlare con noi? Chiamaci allo +39.02.87.23.40.50
Entra

 



Fiere made-by QUiCKFairs®
Scopri perché sono diverse e qual è il tuo vantaggio
 
Jobs
Assumiamo commerciali
 
CLiCK&Fit
Il servizio tutto pronto nelle fiere di QUiCKFairs®
 
Esporre con successo
10 consigli e come il formato  QUiCKFairs® ti supporta
 
Rubriche del Franchising
L'avvocato risponde
Pillole di marketing
 
Pagamento sicuro
logo visa mastercard

 



 

 
team | jobs | contacts | QUiCKFairs® Srl Partita IVA e C.F. 06858580969 - REA MI 1919259  | Capitale Sociale 32.890€ i.v. | Telefono +39 02 36 59 29 90
Le informazioni presenti nelle pagine di questo sito sono Copyright © 2009-2015, QUiCKFairs®.
Il logo ed il nome di QUiCKFairs® sono marchi registrati di proprietà di QUiCKFairs® s.r.l.