Trade show Coiltech Italia 2022 > Visit > World Magnetic Conference

QUiCKFairs® Coiltech Italia 2022

Pordenone, 28/29 September 2022

World Magnetic Conference

The World Magnetic Conference is an integral part of Coiltech.
The organisers see the conference as an excellent opportunity for information exchange between academic and industry research and an important reason to visit the fair.   Since 2010, more than 130 companies and universities have delivered at least one presentation at the conference.

A Steering Committee chaired by Prof. Marco Villani of the University of L'Aquila approves the candidacies of the presentation proposals. Villani is the author and co-author of over 170 publications in conference proceedings and renowned technical and scientific journals.

The organiser does not charge any fees for participation at the conference.

A recognised event to keep up to date and discuss the latest innovations of the market

The conference is an opportunity for developers of solutions in the electromechanical field to share their research results and discuss them with their peers in industry and academia.

To facilitate this exchange, there are no participation fees or contributions.

The only criterion the Steering Committee uses to select presentations is the technical validity of the proposed work.

The conference language is English.

Call for presentations.

WMC Coiltech Italia 2021: closed
WMC Coiltech Deutschland 2022: November 26, 2021 - register here  

or write at 

Visit the page Speakers' Guidelines to know more about the other important dates and deadlines. 

WMC - Topic Proposals

WMC 2021: Topics
 T1  E-Mobility
 T2Advanced powertrains
 T3The electric motor industry
 T5Special electrical machines and actuators
 T6 Measurements and testing of electric machines 
 T7 Materials 
 T8 Manufacturing technologies 
 T9 Software 
 T10 EV Charging station and batteries
 T11   The evolution of the IEC TC2 standards for low voltage inverter-fed machines: the 60034-18-41 and the 60034-27-5


WMC2021 Program Schedule
Wednesday 22/09/2021

 Conference Room


 Sala C6  
  Special electrical machines and actuators11:00 - 12:40
 Sala C8   
  Materials_111:00 - 12:15
 Sala C9  
  E-Mobility11:00 - 12:40


 Sala C6  
  Measurements and testing of electric machines15:00 - 17:30
 Sala C8  
15:00 - 16:15
 Sala C9  
    Manufacturing technologies 15:00 - 17.30 

WMC2021 Program Schedule
Thursday 23/09/2021

 Conference Room


 Sala C6  
  Software_210:30 - 11:50
 Sala C8   
  Advanced powertrains10:30 - 11:45
  EV Charging station and batteries11:45 - 13:00
 Sala C9  
  The evolution of the IEC TC2 standards for low voltage inverter-fed machines: the 60034-18-41 and 60034-27-510:30 - 13:00


 Sala C6  
  Transformers14:00 - 16:35
 Sala C8  
14:30 - 15:50
 Sala C9  
    The electric motor industry14:30 - 16.35 

WMC2021 - Conference Program
Wednesday 22/09/2021      
  11:00 - Sala C6

Wednesday 22/09/2021 
Special electrical machines and actuators

Chairman: T. JezdinskyTJ Market Research Consultant
11:00  A. Pelliccia
EMS Electro Motor Solutions S.r.l.
Design and optimization of an outer totor PMSM for aerospace application
11:25  M. D’Andrea, G. Di DomenicoUmbra Group
EMA fault tolerant architecture for aerospace applications
11:50  A. Brunner TU Wien
A new development of the planetary motor structure including mechanical field weakening
12:15  L. MantioneUniversity of Pavia
Performance comparison between synchronous reluctance motors and interior permanent magnet (IPM) synchronous motors with similar rotor geometries
       11:00 - Sala C8 

Wednesday 22/09/2021  

Chairman: L. FerrarisPolitecnico di Torino
11:00  S. FortunatiRINA - Centro Sviluppo Materiali
Next generation of electrical steel grades for motor applications
11:25  A. FerraiuoloMarcegaglia Ravenna
Fully finished NGOES materials with high performance and low magnetic ageing
11:50  L. FerrarisPolitecnico di Torino
Soft magnetic materials: new measurement methods and magnetic characterization

  11:00 - Sala C9

Wednesday 22/09/2021 
E - Mobility

Chairman: M. VillaniUniversity of L'Aquila
11:00  D. Deruyter, L. Ferretti
A new generation of Axial flux EV Motors
11:25  A. CredoUniversity of L'Aquila
Is the synchronous reluctance motor suitable for traction applications?
11:50  S. Nuzzo, D. BaraterUniversity of Modena and Reggio Emilia
Review and future possibilities of hairpin
technologies in transport applications
12:15  G. VenturiniMotor Design LTD
Cooling solutions for traction electrical machines with hairpin windings

WMC2021 - Conference Program
Wednesday 22/09/2021

  15:00 - Sala C6

Wednesday 22/09/2021 
Measurements and testing of electric machines

Chairman: F. GuastavinoUniversity of Genova
15:00  K. Vervaeke
     Magnetic field measurements of PM rotors for advanced quality analysis
15:25  F. GuastavinoUniversity of Genova
     Methods based on conducted and irradiated signals for partial discharges measurements: potentialities and differences
15:50  G. CiottiTechimp - Altanova Group
     Investigation about the effect of the voltage profile on RPDIV and time to failure for insulation materials subjected to impulsive stress conditions
16:15  D. Tessore
E.D.C. Marposs
 How to detect latent defects in e-motor testing
16:40 D. Popovic RenellaSENIS AG
3D-hall and angle sensor for robot application and 3D testing of magnet-sensor systems
17:05 M. MinerviniUniversity of Pavia
Diagnostic aspects in induction motors. The multi-sensor approach

       15:00 - Sala C8 

Wednesday 22/09/2021


Chairman: G. VenturiniMotor Design LTD
15:00  E. D'Alessandro, M. MerelliEnginSoft
 Electric motor cooling simulation: implementation and comparison of internal oil jet and external water-cooling systems
15:25  M. BettiSPIN Applicazioni Magnetiche
 A new innovative and fast approach for the pre sizing of an axial flux motor
15:50  I. SusanaBraitec
 Coupled effects of governing physical fields in designing electric machines prior to physical prototypes

  15:00 - Sala C9

Wednesday 22/09/2021

Manufacturing technologies

Chairman: G. FabriUniversity of L'Aquila
15:00  F. Lucchetti
     Hairpin 2-3 D forming systems new practice and progress
15:25  F. Di BrunoEMS Electro Motor Solutions
     Hairpin winding: construction aspects, connection rules and simulations of the FEA
15:50  J. KlinkhammerMagnet - Physik
     Quality control of permanent magnets
16:15  A. Levermann
 High performance flat wires made by SHWire
16:40 G. KückenZehnder & Sommer
 Stacking master-process monitoring and interlocking control in one smart system
17:05 P. CaviggioliBTSR International
High constance tension feeders for precise high quality winding with on line data monitoring control

WMC2021 - Conference Program
Thursday 23/09/2021      
  10:30 - Sala C6

Thursday 23/09/2021 

Chairman: G. FabriUniversity of L'Aquila
10:30  P. Nasab
     How mathematics helps designing better products
10:55  L. Di LeonardoUniversity of L'Aquila
Rapid prototyping of electrical drives by
11:20  C. Tozzo, G. Rosati COMSOL
Topology optimization of electric motors and

       10:30 - Sala C8 

Thursday 23/09/2021  
Advanced powertrains

Chairman: A. TessaroloUniversity of Trieste
10:30  S. Nuzzo, D. BaraterUniversity of Modena and Reggio Emilia
WBG motor drives with very high voltage gradients: modelling and design solutions
10:55  L. OrtombinaUniversity of Padova
 Recent advances in synchronous motor drives
11:20  A. Ventura, M. BorassoMeccanotecnica Umbra
Mechanical face seals for cooled rotor e-Axle
EV Charging station and batteries

11:45 C. Di Lodovico, J.  SammarchiSPIN Applicazioni Magnetiche
 Battery pack design for electric propulsion systems
12:10 Alexander KühlUniversity Nuremberg
 Challenges in the automated production of inductive charging pads for electric vehicles
12:35 P. Pescetto, M. Martino, G. PellegrinoPolitecnico di Torino
 Integrated and isolated on-board battery charger for third generation electric vehicles: a FITGEN project research

  10:30 - Sala C9

Thursday 23/09/2021 
The evolution of the IEC TC2 standards for low voltage inverter-fed machines: the 60034-18-41 Ed. 2 and 60034-27-5

Chairman: A. CavalliniUniversity of Bologna
10:30  G. Stanic
Opening and introduction
10:55  A. CavalliniUniversity of Bologna
     The IEC 60034-18-41 Ed. 2 and 60034-27-5: Perspective and challenges ahead
11:20  M. FerrarisElantas
     PD in low voltage motors: how things evolved in the last 10 years from insulating materials perspective
11:45  M. Shanel
 The role of flexible insulation (Supplier) in PD-free design of E-motor
12:10 C. HeroldVonRoll
 15 years of IEC 60034-18-41 Ed. 1. The insulating material producer experience
12:35 A. LuccoOrange One
 15 years of IEC 60034-18-41 Ed. 1. The rotating machine manufacturer experience

WMC2021 - Conference Program
Thursday 23/09/2021

  14:00 - Sala C6

Thursday 23/09/2021 

Chairman: S. FortunatiRINA - Centro Sviluppo Materiali
14:00  F. Ferrari
     The «green» transformers. The technology of the ANIE members in favor of sustainability
14:25  T. JedzinskyTJ Market Research Consultant
Power transformer recycling - a contribution to circular economy in Europe
14:50 R. Koshorst thyssenkrupp
 Development of GOES-grades and its contribution to Eco-Design Tier 2 and environmental aspects
15:15 F. Marini Studio Marini
Manufacturing and applications of cast resin transformers
15:40 S. SiebertBrockhaus Measurements
CoilMap - Continuous monitoring of local variations in magnetic properties across the material width and length of electrical steel coils
16:05 S. PeliCastellini Officine Meccaniche
 Laser scribing for grain oriented electrical steel

  14:30 - Sala C8

Thursday 23/09/2021 


Chairman: L. Di LeonardoUniversity of L'Aquila
14:30 G. Gerbaut
VonRoll France
     Potting and impregnation solutions for higher power density
14:55 L. Ferraris, E. PoskovicPolitecnico di Torino
Hybrid magnetic composites (HMC) materials: properties and applications
15:20 F. CampoELANTAS Europe
The development of a new VOC free unsaturated polyester imide impregnating resin with low viscosity

  14:30 - Sala C9

Thursday 23/09/2021

The electric motor industry

Chairman: M. VillaniUniversity of L'Aquila
14:30L. Iurino, M. Caprioli
Garnet, Fuji Electric
 7th-generation “X Series” IGBT module
14:55 A. Tessarolo, G. JoksimovicUniversity of Trieste,  University of Montenegro
Practical rules for selecting stator and rotor slot numbers in squirrel cage induction motors
15:20 G. StanicElectro Adda
Innovative marine & navy auxiliary and propulsion motors
15:45 M. BertoUniversity of Padova
Sensorless control of electric drives

Steering Committee

The World Magnetic Conference is chaired by Marco Villani, Professor of Design of Electrical Machines at the University of L'Aquila.

The Chair of Prof. Villani supports QUiCKFairs with the continuous improvement of the contents of the conference and the exhibition.

All the members of the Steering Committee:

University of L'Aquila: Prof. M. Villani
Karlsruher Institut für Technologie (KIT): Prof. M. Doppelbauer
QUiCKFairs:  S. Kuester
University of L'Aquila: Dr. G. Fabri
ZVEI: Dr. R. Winter


WMC Presentations from 2010

At the previous editions of the World Magnetic Conference more than 130 companies have discussed the results of their innovations and  researches:

A.M.E. o
ABB o o o o o
Actor o
Albesiano o
Altair o o
Altanova Group o
ANIE o o o o o
Anofol- Steinert o o
Ansys Italia o o o o
Arcelor Mittal o o 
Asita o
Atra o
Aumann o
Aurubis o
Axalta Coating Systems o o
Best Transformers o
Breuckmann o o o
BrockHaus Measurements o o
Bticino o
BTSR o o o
Cedrat o o o o
Centro Ricerche Fiat o
Cibas o
CG Electric Systems Hungary o
Cogent o
Comsol o
Diasol o
DMP Miniprotettori o
Dupont Nomex o
Dv-Power o o
E.D.C. o
Electric Motor Labs o
Electro adda o o o o o
Electrolux o
Elica o o o
Emerson, Leroy Somer o
ENEA - Divisione mobilità Elettrica o o o o o o
ENEA - Divisione superconduttori o o o o
Enginsoft o o
Eomys o
Eurogroup o o o
FAET o o o o o
Fraunhofer Institute o
Favi o
Fundación Cidaut o
Garnet o
GDG Gerätebau o
GKN Sinter Metals o
Heidenain o
Hitachi o o
Hochschule Harz Fachbereich Automatisierung und Informatik o
IFP Energies Nouvelles o
Iles Engineering o
Italtech Wind o
Jsol Corporation o
Karl Rejlek o
Kienle+Spiess o o o
Kriwan o
Kolector o
Laboratorio Elettrofisico o
LAE o o o o o
Lafert o o
LCD Lasercut o o
Mag Cam o 
Magnet - Physik o o o
Marcegaglia o
Marelli Motori o o o o
Marsilli o o o
Mate o
McKinsey o
Metech o
Metrolab Technology o 
Miba Sinter Austria o 
M-Pulse o o
Michele Vanzi & Partners o
M&I Materials o 
Motive o
Motor Design Limited o o
Motovario o o
Mueller-Ahlhorn o
Munich University of Technology o 
Ne-It o 
Nidec Sole Motor o o o
Ningbo Permanent Magnetics o
Politecnico di Milano o
Politecnico di Torino o o o 
Politubes o
Polo Tecnologico Pordenone o
Powersys Solutions o
R13 Technology o o o o 
Rina-Centro Sviluppo Materiali o o o o 
RST Wire o
Rubadue &Co o o 
Salbia o
Schunk Italia o
Sekels o
Senis o o o
SIM - Studio Ingegneria Marini o o o o o
Sisram o
SKF o o o o o
Spin Applicazioni Magnetiche o o o o o o o
SWD o o
Tamini o o o
Tecnomatic o o
Teledyne Lecroy o o
thyssenkrupp Electrical Steel o o o
Transfluid o
TUM - Technical University of Munich o o
TU Wien - Technical University of Wien o o o
UL o o
Umbra Cuscinetti o o o o o o o
University of Bologna o
University of Genova o
Università dell’Aquila o o o o o o o
University of Ljubljana o
Universitò di Padova o o
University of Trieste o
Università di Udine o o
Vacuumschmelze o o
Victrex o

Editions WMC

World Magnetic Conference 2022

phone: +39 0862 434428